SB-1800 Surebond Everflex Bondaprene

HeatersPlus.com

Questions? 1-800-442-2581
8:00am-5:00pm M-F (Eastern Time)

Our secure online ordering website: www.MorElectricHeating.com.
Our other websites: www.InfraredHeaters.com and www.Fans-Plus.com.

Share |

Follow @morelectricheat

SB-1800 Surebond Everflex Bondaprene

We are an authorized distributor for Surebond, Inc.

For adhering metal or plastic roof clips to metal roofs only. Not for shingles (Asphalt).
A tube of Surebond is estimated to be enough to adhere 20 roof clips.

TECHNICAL DATA SHEET

APPLICATION: Interface and surfaces must be clean, dry and free of dust, dirt, oil, frost, moisture and water proofing and release agents. All painting should be done before application. Cut cartridge nozzle for 3/8” hole and puncture inner seal, apply bead size as desired. Always apply uniform bead and tool immediately after application to ensure full contact with both sides of the joint area. Squeeze out should not occur on most overlap seals applied properly. Sealant starts to skin over in five to ten minutes and dries to the touch within an hour.

CLEANING: While uncured, remove excess material from tools with Xylene. After curing, sealant can be easily cut away. See cautions on cleaner labels.

SHELF LIFE: 12 months.

STORAGE: Unopened containers should be stored for up to nine months at 60ºF to 70ºF, 50% R.H. in a cool, dry area.

CAUTION: For industrial use only. Skin and eye irritant. Harmful if swallowed. Avoid contact with or breathing in of vapor and use adequate ventilation. Material on skin should be wiped and washed off with soap and water. For eyes, flush with water and seek medical attention.

SEE MATERIAL SAFETY DATA SHEET.

PACKAGING: 10.3 oz. cartridge

COLOR: Clear.

FEATURES:

• Spot-weldable

• Fast cure

• Non-flammable

• Wide application temperature

• No shrinkage

• Non-sag

• Non-staining

• One part

BENEFITS:

• Protects welds from corrosion

• Minimizes dirt and dust pick up, expedited production

• Product maintains integrity and flexibility in service temperature range

• Can be applied from -20ºF to over 140ºF

• Reduces product need by 50%

• Allows for panel and overhead applications

• Will not discolor materials

• Easy application

SPECIFICATIONS:

Tack Time 40-60 Minutes TT-S-00230C Test Method
Cure Time 24 Hours Using 1/8” Bead
Tensile Strength 360 PSI ASTM-D412 Test Method
Service Temperature, Cured -80ºF to +480ºF TT-S-00230C Test Method

Elongation 450% fully cured ASTM-D412 Test Method

Staining None TT-S-00230C Test Method

Hardness, Shore A 28 TT-S-00230C Test Method

SB-1800 EAll values are typical at 75ºF, 50% R.H. unless otherwise noted.

Federal Specifications TT-S-00230C used when applicable.

More information about Adhering Roof Clips to a metal roof when using roof & gutter heating cable

Secure Online Ordering Delivery time for the following product: Typically in stock. Shipped in 1 working day or less. The transit time to you depends on your physical location and your selected UPS/FedEx shipping method, the cost of which will be displayed in your shopping cart.
Item ID	Catalog #	Description	Click "Select" below to see our price and actual real-time quantity in stock
MORSNOW10001	SB-1800	Everflex Bondoprene

[ Home ] [ Up ]

Share |

Follow @morelectricheat

We are a Distributor of Industrial, Commercial and Residential Heaters and Controls. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2010 Mor Electric Heating Assoc., Inc.

MOR ELECTRIC HEATING ASSOC., INC. 5880 Alpine Ave. NW - Comstock Park, MI 49321 USA Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775 E-mail: sales@heatersplus.com