|
Markel Products Co.
We are an authorized distributor for
Markel Products Co.,
a division of TPI Corp.,
a manufacturer of Baseboard, Wall and Ceiling Heaters
and ventilation equipment and lighting equipment.
 |
TSH Series
Fan Forced Kickspace Specialty Heater. Fits into soffits, stair risers
or under utility cabinets, Finned steel sheath heating element and
manual reset thermal cut-out, Recessed opening: L = 22 3/8” W = 3 5/8” D
= 11 1/2” |
 |
3900
Hydronic Baseboard Heaters. Permanent mount, liquid
filled elements, Residential models in “White” powder coat finish,
Commercial models available in “Bankers Bronze”, Extruded 12 gauge
aluminum housing |
 |
ICH-240C
Fan Forced Utility Heater.
CONSTRUCTION SITE / UTILITY HEATER, Operates on 240v or 208v, Steel tubular
heating element, 43°F air heat rise, Internal overheat thermostat,
Temperature control thermostat, 6' long cordset |
 |
178 TMC
Ceramic Fan Forced Heater. 850w &
1500w heat settings plus fan only setting. Automatic reset type limit
control. Thermal cut-off device. 6' long - 3 conductor cord. Temperature
control thermostat. Width: 11 1/4'. Height: 10". Depth: 7" |
 |
HF Fan Forced
Portable Unit Heater. Operates on
240v or 208v, Finned steel tubular heating element, Internal manual reset
thermal cut-out, 6' long cord with molded plug, Temperature control
thermostat with 35°F to 85°F range, 10’ air throw - 262 CFM.
Swivel base can be used as a wall,
floor or ceiling mount |
 |
Type HLA
Hazardous Location Unit Heaters.
Suspended Fan-Forced Unit Heaters.
3 to 25KW at 208 to 600 volt. They're designed for rugged
industrial applications in hazardous locations where the possibility of
explosion or fire exists due to flammable gases, vapors, powdered metals
or dusts. |
 |
Type FEP Hazardous
Location Cabinet Unit Heaters. NEMA 4 Hose-Down
Hazardous Location Convection Heaters are for use in: "Class I, Division I
& II, Groups B, C & D." (T2A-UL, CSA, T3A-CSA). Voltages range from
120V to 600V. |
 |
TaskMaster 5100 Heavy Duty Unit Heater.
Suspended Fan-Forced Unit
Heaters ranging in size from 3 to 25KW at 208 to 600 volt. |
|
